MCQ 1 Statement (i) : A homogeneous rock material is one in which the physical properties for all of its parts or elements are the same.
Statement (ii) : As isotropic material is one that has the same physical proper-ties in every direction at any point.
Statement (iiii) : An anisotropic material is one with certain of its properties varying with direction at any point.
Statement (iv) : Heterogeneity is a characteristics of a material or a force field signifying that the material has properties which vary with position within it.
Out of the above statements, which is correct
MCQ 2 Total core Recovery = 265 cm, Total Core Run = 300 cm, Modified Core Recovery = 242 cm. Find R.Q.D.
MCQ 3 Bearing capacity depends on:
Statement (i) : Depth of footing
Statement (ii) : Width of footing
Statement (iii) : Unit weight of rock mass
Statement (iv) : Angle of internal friction
Out of the above statements :
MCQ 4 Increase in moisture content of rock
MCQ 5 In addition to the environment, rock strength depends on the following
Statement (i) : Size of the rock specimen
Statement (ii) : Rate of loading
Statement (iii) : Cycle of loading
Statement (iv) : Loading condition.
Out of the above statements
MCQ 6 Statement (i) : The moisture content of a rock sample is defined as the ratio of weight of water in the voids to the weight of total mass.
Statement (ii) : Bearing capacity increases air with increase in degree of saturation.
Statement (iii) : Degree of saturation is defined as the volume of water in the voids to the total volume of the rock sample.
Statement (iv) : Permeability refers to the ability of a porous material to allow a liquid to pass through its pores.
Out of the above statements
MCQ 7 Mechanical properties which are of interest in rock mechanics are: Strength, Deformability, Elasticity and
MCQ 8 Porosity of a rock sample is defined as ratio of the volume of void to the
MCQ 9 Mechanical properties of a rock mass depends on the following factors
Statement (i) : The mechanical properties of individual elements constituting the system.
Statement (ii) : The sliding friction along the planes of weakness.
Statement (iii) : The configuration of the system with respect to direction of loading
Statement (iv) : The induced stress condition inside the mass.
Out of the above statements :
MCQ 10 Length to diameter ratio for bending test is kept as
MCQ 11 Length to diameter ratio for compressive strength test is kept as
MCQ 12 Which of the following statements is correct cooice?
MCQ 13 Which of the following statements is correct choice?
MCQ 14 Which of the following statements is correct ?
MCQ 15 Statement (i) : The creep phenomenon in rock is explained due to cracking in the rock mass
Statement (ii) : The creep phenomenon in rock is explained due to mass flow
Statement (iii) : The creep phenomenon in rock is explained due to cracking and mass flow
Out of the above statements
MCQ 16 Statement (i) : The creep has got three parts: primary creep, secondary creep and tertiary creep
Statement (ii) : Primary creep is followed by tertiary creep and secondary creep
Statement (iii) : Tertiary creep is followed by primary and secondary creep
Statement (iv) : Primary creep is followed by secondary creep and tertiary creep.
Out of the above statement :
MCQ 17 The fracture interference is a unique function of
MCQ 18 Statement (i) : Rocks fail by splitting, shear or combination of these
Statement (ii) : Failure of rock is either ductile or brittle and it depends upon the amount of temperature
Statement (iii) : Fracture of rock is either ductile or brittle and it depends upon the amount of confining pressure
Statement (iv) : Shear failure occurs in a rock if confining pressures are sufficiently high to prevent splitting.
Out of above statements. which choice is correct.
MCQ 19 Shear strength of rock is a function of
MCQ 20 Rocks fail by
MCQ 21 Factors influencing ware velocity are
Statement (i) : Water content of the rock mass
Statement (ii) : Temperature of the rock mass
Statement (iii) : Direction of propogation with respect to stratification of thE rock
Statement (iv) : Porosity of the rock mass
Out of the above statements
MCQ 22 Which Statement iscorrect.
Statement (i) : Propogation of velocity of stress wave in rock increases with an increase of pressure
Statement (ii) : Propagation of velocity of stress wave in rock decreases with an increase of pressure
Statement (iii) : Propagation of velocity of stress wave in rock remains same even if there is an increase of pressure.
MCQ 23 Which Statement is correct. When a rock cavity is to be bolted, following informations are necessary for proper design of the bolting system.
Statement (i) : Type of rock surrounding the cavity
Statement (ii) : Type of fractures and filled up materials in the joint
Statement (iii) : Geometry of the joints
Statement (iv) : Rock pressure
MCQ 24 Grouting activities are carried out for
MCQ 25 Cement-water grout comes in the category of